Global regulations corpus
Browse 15,113 regulations from 36 regulators
2,956 updated in the last 30 days. Public corpus — no signup required to read.
Showing 701–708 of 708 regulations
2009 IECC with New Hampshire amendments
Buuilding envelop requirements applies to new residential buildings, as defned in the IECC, with wood framing and/or mass walls. For steel framed buildings, the same window requirements apply; however, refer to IECC section 402.2.5 for specific ceiling, wall and floor insulation…
2012 IECC with Nevada amendments
The new energy codes become effective. The residential code is based on the 2012 IECC with Nevada amendments. The commercial code is based on the 2012 IECC with Nevada amendments with ASHRAE Standard 90.1-2010. The code applies to new residential buildings, as defined in the…
2012 IECC with Montana amendments
Due to state amendments, the residential code is not quite equivalent to the 2012. Still, major improvement to the new energy code include: More efficient windows (U-0.32); More efficient crawlspace walls; Mandatory whole-house blower-door test requirement, beginning 2016;…
National Energy Policy
The National energy policy for Malta was launched in December 2012 after the publication of a first draft in 2009 and the finalisation of a strategic environmental impact assessment in September 2012. It lists decisions and actions that have already been implemented as well as…
Act on the rational use of energy (Energy Efficiency Act)
Act on the rational use of energy (known as the “Energy Efficiency Act”) was enacted in 1979 (enforced in October 1979). The Act is the foundation of Japans’ energy efficiency and conservation policy. There has been a series of major revisions in 1993, 1998, 2002, 2005, 2008,…
NOM-024-ENER-2012: Thermal and optical characteristics of glass and glazing systems for buildings. Labelling and test methods
This standard establishes the obligation to certify the optical and thermal characteristics of glass and glass systems, homogeneous transparent and translucent for use in buildings. The properties under this standard are: visible transmittance (VT); solar heat gain coefficient…
Windows Energy Rating Scheme (WERS)
The Window Energy Rating Scheme enables windows to be rated and labelled for their annual energy impact on a whole house, in any climate of Australia. To participate in WERS, window makers must obtain energy ratings for their products from a rating organisation that is…
Market transformation road map for energy efficient equipment in the building sector
In support of Canada's Building Strategy, Federal, Provincial and Territorial Governments outlined a series of aspirational goals for energy performance of key equipment technologies and market transformation needs in a report released at the Energy and Mines Minister’s…