INTIEAUnited States · 2009 IECC with New Hampshire amendmentsPolicyIn force

2009 IECC with New Hampshire amendments

Buuilding envelop requirements applies to new residential buildings, as defned in the IECC, with wood framing and/or mass walls. For steel framed buildings, the same window requirements apply; however, refer to IECC section 402.2.5 for specific ceiling, wall and floor insulation…

Last changed 7 years ago.

Extracted view for reading · Original for compliance evidence

Lifecycle

  1. Effective
  2. Last change

Country / jurisdiction: United States · Year: 2010 · Status: In force · Level: State/Provincial · Type: Voluntary

Buuilding envelop requirements applies to new residential buildings, as defned in the IECC, with wood framing and/or mass walls. For steel framed buildings, the same window requirements apply; however, refer to IECC section 402.2.5 for specific ceiling, wall and floor insulation R-value requirements. The code also applies to all additions, alterations and replacement windows and it is based upon the thermal envelop requirements in the 2009 IECC's prescriptive compliance option for the appropriate climate zone and does not reflect any state-specific amendments to the IECC.

Official source: http://insulationinstitute.org/wp-content/uploads/2015/12/NH-2009.pdf

Source

https://www.iea.org/policies/7085

Canonical document at the regulator. Always cite this URL — not the Vantage detail page — in compliance evidence.

Related in International

INTIEACanada · National Energy Code of Canada for BuildingsPolicyIn force

National Energy Code of Canada for Buildings

The National Energy Code of Canada for Buildings (NECB) 2025 is a national model code that sets technical requirements that address the protection of the environment in the design and construction of new buildings and in subsequent alterations. The 2025 edition was published in…

10 days agoeff.
INTIEACanada · Deep Retrofit Accelerator InitiativePolicyIn force

Deep Retrofit Accelerator Initiative

Launched by Natural Resource Canada in February 2023, the Deep Retrofit Accelerator Initiative (DRAI) provides funding to organisations and projects that facilitate the development of deep retrofits in commercial, institutional, and mid- or high-rise multi-unit residential…

10 days agoeff.
INTIEASweden · Tax exemption for pure and highblend biofuelsPolicyIn force

Tax exemption for pure and highblend biofuels

The Swedish scheme to promote the use of sustainable biofuels in transport has been prolongated until 31 December 2032 with an estimated budget of 1.3 USD billion (SEK 14.2 billion).    The scheme was originally approved by the Commission in November 2003 and prolonged several…

10 days agoeff.
INTIEACanada · Codes Acceleration Fund (CAF)PolicyIn force

Codes Acceleration Fund (CAF)

Launched by Natural Resource Canada in 2023,  the Codes Acceleration Fund (CAF) provides funding to support efforts to accelerate and contribute to code (or regulation) adoption, compliance and enforcement. The programme provides funding to:   • provinces, territories,…

10 days agoeff.
INTIEACanada · Energy Efficiency Regulations, 2016 - Electric motorsPolicyIn force

Energy Efficiency Regulations, 2016 - Electric motors

The Energy Efficiency Regulations set standards for several industrial products and industrial applications of products including motors, air compressors, pumps, dry-type transformers and ceiling fans.     The standards for electric motors were regularly updated, lastly in 2022…

10 days agoeff.