INTIEAItaly · Decree on the Cut of Incentives for Photovoltaic Plants (Spalma Incentivi)PolicyIn force

Decree on the Cut of Incentives for Photovoltaic Plants (Spalma Incentivi)

Art. 26 of the  Law 116/2014 (the Spalma Incentivi provision) applies a reduction to the tariffs that have been awarded under any Conto Energia to PV plants with a nominal peak power exceeding 200 kW, with the following options: A) Option A provides for a solution that was…

Last changed 12 years ago.

Extracted view for reading · Original for compliance evidence

Lifecycle

  1. Effective
  2. Last change

Country / jurisdiction: Italy · Year: 2014 · Status: In force · Level: National · Type: Voluntary

Art. 26 of the  Law 116/2014 (the Spalma Incentivi provision) applies a reduction to the tariffs that have been awarded under any Conto Energia to PV plants with a nominal peak power exceeding 200 kW, with the following options:

A) Option A provides for a solution that was already contemplated by the Law-Decree: i.e., a reduction of the tariff by a ratio ranging from 17% to 25% depending on the residual incentivised period compensated by an extension of the incentivised period to 24 years starting from the date of entry into operation of the relevant plant (instead of the current 20 years).

B) Option B provides that, without modifying the duration of the incentivised period (i.e.,20 years), during a first part of the remaining incentivised period, the tariff will be reduced and that, during a second part of the remaining incentivised period, the FIT will be increased. The re-modulation ratios will be established by the Italian Ministry for Economic Development.

C) Option C provides for a flat reduction of the tariff, for the remaining incentivised period without modifying the duration of the same, equal to 6% for plants with a capacity between 200 and 500 kW, 7% for plants with a capacity between 500 and 900 kW,  8% for plants with a capacity above 900 kW.

Official source: http://www.gse.it

Source

https://www.iea.org/policies/5653

Canonical document at the regulator. Always cite this URL — not the Vantage detail page — in compliance evidence.

Related in International

INTIEACanada · National Energy Code of Canada for BuildingsPolicyIn force

National Energy Code of Canada for Buildings

The National Energy Code of Canada for Buildings (NECB) 2025 is a national model code that sets technical requirements that address the protection of the environment in the design and construction of new buildings and in subsequent alterations. The 2025 edition was published in…

10 days agoeff.
INTIEACanada · Deep Retrofit Accelerator InitiativePolicyIn force

Deep Retrofit Accelerator Initiative

Launched by Natural Resource Canada in February 2023, the Deep Retrofit Accelerator Initiative (DRAI) provides funding to organisations and projects that facilitate the development of deep retrofits in commercial, institutional, and mid- or high-rise multi-unit residential…

10 days agoeff.
INTIEASweden · Tax exemption for pure and highblend biofuelsPolicyIn force

Tax exemption for pure and highblend biofuels

The Swedish scheme to promote the use of sustainable biofuels in transport has been prolongated until 31 December 2032 with an estimated budget of 1.3 USD billion (SEK 14.2 billion).    The scheme was originally approved by the Commission in November 2003 and prolonged several…

10 days agoeff.
INTIEACanada · Codes Acceleration Fund (CAF)PolicyIn force

Codes Acceleration Fund (CAF)

Launched by Natural Resource Canada in 2023,  the Codes Acceleration Fund (CAF) provides funding to support efforts to accelerate and contribute to code (or regulation) adoption, compliance and enforcement. The programme provides funding to:   • provinces, territories,…

10 days agoeff.
INTIEACanada · Energy Efficiency Regulations, 2016 - Electric motorsPolicyIn force

Energy Efficiency Regulations, 2016 - Electric motors

The Energy Efficiency Regulations set standards for several industrial products and industrial applications of products including motors, air compressors, pumps, dry-type transformers and ceiling fans.     The standards for electric motors were regularly updated, lastly in 2022…

10 days agoeff.