INTIEASpain · Cabinet of Ministers Ruling for Wind and Solar Thermal Electric Energy quotasPolicyIn force

Cabinet of Ministers Ruling for Wind and Solar Thermal Electric Energy quotas

The Royal Decree-Act 6/2009, of 30th April, laid down the inception of the Pre-assignment Registry for energy installations belonging to the Special Regime. It also allowed the possibility of establishing a specific schedule aiming to plan and control the commissioning of…

Last changed 14 years ago.

Extracted view for reading · Original for compliance evidence

Lifecycle

  1. Effective
  2. Last change

Country / jurisdiction: Spain · Year: 2009 · Status: In force · Level: National · Type: Voluntary

The Royal Decree-Act 6/2009, of 30th April, laid down the inception of the Pre-assignment Registry for energy installations belonging to the Special Regime. It also allowed the possibility of establishing a specific schedule aiming to plan and control the commissioning of pre-registered power capacity for those technologies whose installed capacity exceeded the objectives set out by the Spanish Renewable Energy Plan 2005-2010. Accordingly, in this context, the Cabinet of Ministers Ruling in hand set up an organised power plant commissioning calendar for the years to come; focusing on Wind and Solar Thermal Electric renewable energy technologies, and up to the end of 2012 and 2013 respectively. It establishes a power plant commissioning roadmap which allocates an annual average installed capacity slightly higher than 1,700 MW for wind power and 500 MW for solar thermal electric power. The Ruling intends to administer the amount of renewable energy installed so as to offer a sensible apportionment of consumer costs over the years, as well as to provide technical feasibility of renewable energy integration into the electrical grid. At the same time, it minimises uncertainty for the industry and investors, by providing a medium-term foreseeable future, which will assist all involved agents in their business and risk planning. Finally, it represents an important step towards the achievement of the 2020 Spanish mandatory targets regarding the share of renewable energy sources, set in the Directive 2009/28/EC of the European Parliament and of the Council of 23 April 2009.

Official source: http://www.boe.es/boe/dias/2009/11/24/pdfs/BOE-A-2009-18772.pdf

Source

https://www.iea.org/policies/4894

Canonical document at the regulator. Always cite this URL — not the Vantage detail page — in compliance evidence.

Related in International

INTIEACanada · National Energy Code of Canada for BuildingsPolicyIn force

National Energy Code of Canada for Buildings

The National Energy Code of Canada for Buildings (NECB) 2025 is a national model code that sets technical requirements that address the protection of the environment in the design and construction of new buildings and in subsequent alterations. The 2025 edition was published in…

10 days agoeff.
INTIEACanada · Deep Retrofit Accelerator InitiativePolicyIn force

Deep Retrofit Accelerator Initiative

Launched by Natural Resource Canada in February 2023, the Deep Retrofit Accelerator Initiative (DRAI) provides funding to organisations and projects that facilitate the development of deep retrofits in commercial, institutional, and mid- or high-rise multi-unit residential…

10 days agoeff.
INTIEASweden · Tax exemption for pure and highblend biofuelsPolicyIn force

Tax exemption for pure and highblend biofuels

The Swedish scheme to promote the use of sustainable biofuels in transport has been prolongated until 31 December 2032 with an estimated budget of 1.3 USD billion (SEK 14.2 billion).    The scheme was originally approved by the Commission in November 2003 and prolonged several…

10 days agoeff.
INTIEACanada · Codes Acceleration Fund (CAF)PolicyIn force

Codes Acceleration Fund (CAF)

Launched by Natural Resource Canada in 2023,  the Codes Acceleration Fund (CAF) provides funding to support efforts to accelerate and contribute to code (or regulation) adoption, compliance and enforcement. The programme provides funding to:   • provinces, territories,…

10 days agoeff.
INTIEACanada · Energy Efficiency Regulations, 2016 - Electric motorsPolicyIn force

Energy Efficiency Regulations, 2016 - Electric motors

The Energy Efficiency Regulations set standards for several industrial products and industrial applications of products including motors, air compressors, pumps, dry-type transformers and ceiling fans.     The standards for electric motors were regularly updated, lastly in 2022…

10 days agoeff.