Global regulations corpus
Browse 15,074 regulations from 36 regulators
2,983 updated in the last 30 days. Public corpus — no signup required to read.
Showing 1–50 of 127 regulations
Environmental Quality
NASA establishes environmental quality policy requiring all NASA headquarters and field installations to protect and enhance environmental quality through systematic planning, research, and coordination with federal, state, and local authorities. The regulation assigns responsibility to the Associate Administrator for Management to coordinate environmental policies, develop agencywide standards and procedures, and ensure environmental factors are considered in all NASA decisions and actions.
Organization and Definitions
14 CFR Part 401 establishes the organizational structure and definitions governing commercial space transportation regulation in the United States. The Office of Commercial Space Transportation, located within the Federal Aviation Administration, is headed by an Associate Administrator responsible for licensing, permitting, and regulating commercial space launch and reentry activities. The regulation provides standard definitions for key terms used throughout commercial space transportation regulations, including crew, payload, flight safety systems, abort procedures, and casualty areas, establishing the foundational terminology for FAA oversight of the commercial space industry.
Care and Use of Animals in the Conduct of NASA Activities
NASA regulation 14 CFR Part 1232 establishes policies for the care and use of vertebrate animals in NASA activities, including those conducted at NASA facilities, spacecraft, and through contracts with external entities. The regulation requires compliance with the Animal Welfare Act of 1966 and implements minimum standards of care and treatment for animals used in NASA research, testing, teaching, and hardware development.
Food Labeling
21 CFR Part 101 establishes federal requirements for food labeling on packaged products. It defines the principal display panel as the most prominently displayed label surface and specifies its measurement for rectangular, cylindrical, and irregularly shaped containers. The information panel must appear immediately contiguous to the principal display panel and contain required disclosures in conspicuous, legible text of at least one-sixteenth inch height. These provisions ensure consumers can readily access mandatory nutritional and ingredient information at retail.
Hazard Analysis and Critical Control Point (HACCP) Systems
21 CFR Part 120 establishes mandatory Hazard Analysis and Critical Control Point (HACCP) systems for juice processing. The regulation requires all juice sold or used as a beverage ingredient to be processed according to HACCP requirements, with applicability phased in for small and very small businesses between 2002 and 2004. The rule defines key terms including critical control points, critical limits, food hazards, and control measures to prevent biological, chemical, and physical contamination risks.
Color Additives
21 CFR Part 70 establishes federal regulations governing color additives used in foods, drugs, and cosmetics under the Federal Food, Drug, and Cosmetic Act. The regulation defines color additives as dyes, pigments, or synthetic substances capable of imparting color when added to food, drugs, cosmetics, or the human body, and clarifies exemptions for natural food ingredients and substances where color is incidental to primary function. The FDA's Color Certification Branch administers certification procedures for regulated color additives.
Color Additive Certification
21 CFR Part 80 establishes the FDA's color additive certification procedures and fee schedules. Manufacturers must submit certification requests with prescribed samples and fees ($0.45/lb minimum $288 for straight colors; tiered fees for repacks). Requests require duplicate submission, responsible officer signature, and advance deposit option. The regulation governs batch certification, foreign manufacturer requirements, and refund procedures for advance deposits.
Good Laboratory Practice for Nonclinical Laboratory Studies
21 CFR Part 58 establishes Good Laboratory Practice (GLP) standards for nonclinical laboratory studies supporting FDA applications for regulated products including drugs, medical devices, biologics, food and color additives, and electronic products. The regulation ensures quality and integrity of safety data submitted under the Federal Food, Drug, and Cosmetic Act and Public Health Service Act by defining requirements for test articles, control articles, study scope, and application types covered.
Unavoidable Contaminants in Food for Human Consumption and Food-Packaging Material
21 CFR Part 109 establishes the regulatory framework for unavoidable contaminants in food and food-packaging materials. It defines naturally occurring versus added poisonous or deleterious substances, and authorizes the FDA to establish tolerances, regulatory limits, and action levels for contaminants. The regulation distinguishes between substances controlled as food additives under section 409 of the Federal Food, Drug, and Cosmetic Act and those managed through tolerance or action level mechanisms, with EPA typically controlling pesticide residues.
Foods for Special Dietary Use
21 CFR Part 105 establishes regulatory requirements for foods marketed for special dietary uses, including those for medical conditions, specific age groups, and fortified products. The regulation defines labeling requirements for hypoallergenic foods, infant foods, and weight-management foods, mandating clear ingredient disclosure, allergen source identification, and processing information where applicable.
General
This regulation establishes procedures for states and political subdivisions to petition the FDA for exemption from federal food labeling and composition preemption under the Federal Food, Drug, and Cosmetic Act. States may request exemptions if their requirements do not conflict with federal law, do not unduly burden interstate commerce, and address specific information needs not met by federal requirements. Petitions must demonstrate state authority, preemption applicability, and that requirements differ from federal standards.
Common or Usual Name for Nonstandardized Foods
This FDA regulation establishes requirements for the common or usual names of nonstandardized foods. Names must accurately describe the basic nature and characterizing properties of foods in simple, direct terms and be uniform across identical products. When characterizing ingredients materially affect price or consumer perception, their percentage must be declared on the principal display panel in specified font sizes and format. Presence or absence of key ingredients must also be disclosed when it could mislead consumers about the product's composition.
Administrative Practices and Procedures
21 CFR Part 10 establishes administrative practices and procedures governing petitions, hearings, and administrative proceedings conducted by the FDA under the Federal Food, Drug, and Cosmetic Act and related laws. It defines key terms such as administrative action, administrative file, ex parte communication, and participant, and clarifies the applicability and scope of FDA administrative proceedings and related regulatory sections.
Color Additive Petitions
21 CFR Part 71 establishes the petition process for proposing color additives for use in foods, drugs, cosmetics, or human body coloring. Petitioners must submit detailed information including the additive's chemical identity, composition, physical and chemical properties, production methods, and safety data. Petitions require specification of intended uses, proposed conditions of use, and supporting toxicological and analytical data to demonstrate safety and suitability for FDA approval.
Listing of Color Additives Exempt from Certification
21 CFR Part 73 establishes permitted color additives exempt from FDA certification for food use, including diluents in color additive mixtures. It specifies GRAS substances and approved diluents for general food coloring, marking food supplements and produce, and coating shell eggs, with detailed specifications for substances like annatto extract including limits on arsenic and lead contamination.
Infant Formula Requirements Pertaining to Current Good Manufacturing Practice, Quality Control Procedures, Quality Factors, Records and Reports, and Notifications
21 CFR Part 106 establishes current good manufacturing practice (cGMP), quality control, and quality factor requirements for infant formula manufacturers under the Federal Food, Drug, and Cosmetic Act. Manufacturers must comply with processing standards, quality factors, and record-keeping procedures; non-compliance renders formula adulterated. The regulation mandates manufacturer registration, submission, and notification to the FDA.
Regulation of Combination Products
21 CFR Part 4 establishes current good manufacturing practice (CGMP) requirements for combination products, which are products containing two or more constituent parts (drugs, devices, or biological products). The regulation clarifies how CGMP rules apply to both co-packaged and single-entity combination products, defines key terms, and outlines the regulatory framework for designing and implementing CGMP operating systems at manufacturing facilities.
Thermally Processed Low-Acid Foods Packaged in Hermetically Sealed Containers
21 CFR Part 113 establishes regulatory requirements for thermally processed low-acid foods packaged in hermetically sealed containers. The regulation defines key concepts including commercial sterility, aseptic processing, critical factors, and equipment specifications to ensure microorganisms capable of reproducing under normal storage conditions are eliminated, protecting public health and maintaining product safety in shelf-stable food manufacturing.
Acidified Foods
21 CFR Part 114 establishes current good manufacturing practice requirements for acidified foods—low-acid foods to which acids are added to achieve a finished pH of 4.6 or below. Processors must employ quality control procedures and employ supervisory personnel trained in food handling, pH controls, and acidification. The regulation defines key terms including acidified foods, scheduled processes, and water activity, and exempts certain products like carbonated beverages, jams, and refrigerated foods from coverage.
Formal Evidentiary Public Hearing
This FDA regulation (21 CFR Part 12) establishes procedural rules for formal evidentiary public hearings before the FDA Commissioner. It covers initiation of proceedings for issuing, amending, or revoking regulations and orders related to food additives, color additives, drugs, medical devices, and biologics. The regulation specifies timelines for submitting petitions, objections, and hearing requests (typically 30 days), notification requirements, and incorporation of the Equal Access to Justice Act procedures for expense reimbursement.
Standards for the Growing, Harvesting, Packing, and Holding of Produce for Human Consumption
21 CFR Part 112 establishes standards for growing, harvesting, packing, and holding of produce for human consumption. It covers raw agricultural commodities including fruits, vegetables, and nuts grown domestically or imported into the US, with specific exemptions for produce rarely consumed raw, farm-direct consumption, and items undergoing commercial processing that reduces microorganisms of public health significance.
Nutritional Quality Guidelines for Foods
21 CFR Part 104 establishes nutritional quality guidelines for foods, prescribing minimum nutrient levels for food classes. Products complying with guidelines may use a government-approved statement on labeling. The regulation prohibits misleading claims about nutritional differences and requires prominent declarations when nutrients are added at inappropriate levels or in excess of guideline maximums. It establishes uniform fortification principles to maintain desirable nutritional quality in the food supply while preventing random fortification that could cause nutrient imbalances.
Current Good Manufacturing Practice in Manufacturing, Packaging, Labeling, or Holding Operations for Dietary Supplements
21 CFR Part 111 establishes Current Good Manufacturing Practice (CGMP) requirements for dietary supplement manufacturers, packagers, labelers, and distributors in the US. The regulation applies to all entities manufacturing or importing dietary supplements, with exemptions for retail-only storage. Key definitions include batch/lot identification, component specifications, in-process materials, and microorganism standards to ensure product identity, purity, strength, and composition.
Listing of Certified Provisionally Listed Colors and Specifications
21 CFR Part 82 establishes specifications and certification requirements for provisionally listed coal-tar colors used in food, drugs, and cosmetics. The regulation defines key terms including alumina, blanc fixe, and gloss white, and sets permissible limits for impurities such as lead, arsenic, and heavy metals in straight colors and certifiable mixtures. It outlines requirements for batch composition, diluent safety, and certification procedures for color products intended for food, drug, and cosmetic applications.
Dietary Supplements That Present a Significant or Unreasonable Risk
This regulation designates dietary supplements containing ephedrine alkaloids as adulterated products under the Federal Food, Drug, and Cosmetic Act because they present an unreasonable risk of illness or injury under recommended or ordinary conditions of use.
Current Good Manufacturing Practice, Hazard Analysis, and Risk-Based Preventive Controls for Human Food
21 CFR Part 117 establishes current good manufacturing practice (CGMP), hazard analysis, and risk-based preventive controls requirements for human food manufacturing, processing, packing, and holding facilities in the US. The regulation defines applicability, key food safety terms (including critical control points, allergen cross-contact, environmental pathogens), and compliance obligations under the Federal Food, Drug, and Cosmetic Act to prevent adulteration and contamination.
Current Good Manufacturing Practice in Manufacturing, Packing, or Holding Human Food
21 CFR Part 110 establishes current good manufacturing practice (CGMP) standards for manufacturing, packing, and holding human food. The regulation defines key terms including acid foods, critical control points, food-contact surfaces, microorganisms, pests, sanitization, and quality control operations. It sets mandatory requirements (indicated by "shall") and advisory procedures to prevent food adulteration and ensure food safety through proper manufacturing and sanitation practices.
Environmental Impact Considerations
21 CFR Part 25 establishes FDA procedures for implementing the National Environmental Policy Act (NEPA), requiring environmental impact assessments for major Federal actions related to FDA-regulated products including drugs, biologics, and medical devices. The regulation defines key NEPA terms and establishes supplemental procedures consistent with FDA's authority under the Federal Food, Drug, and Cosmetic Act and Public Health Service Act.
Listing of Color Additives Subject to Certification
21 CFR Part 74 establishes regulations for certified color additives used in food, including dietary supplements. The regulation specifies identity requirements, purity specifications, permissible uses, and labeling standards for FD&C Blue No. 1 and FD&C Blue No. 2. These synthetic dyes must meet strict composition and contamination limits for volatile matter, impurities, heavy metals (chromium, manganese, arsenic, lead), and total color content, and all batches require certification per 21 CFR Part 80.
Indirect Food Additives: Polymers
21 CFR Part 177 establishes safety standards for acrylic and modified acrylic plastics used in food contact applications. The regulation permits semirigid and rigid acrylic polymers as articles or components in contact with food, provided they contain at least 50% polymer units from specified acrylic or methacrylic monomers. Optional additives include GRAS substances and approved compounds; specific monomers and copolymers are listed, with restrictions on minor monomers for repeated-use articles only.
Food Additives
21 CFR Part 170 establishes regulatory definitions and general provisions governing food additives under the Federal Food, Drug, and Cosmetic Act. A food additive is any substance not exempted by law whose intended use may result in it becoming a component of food or affecting food characteristics, including substances in food contact articles and packaging materials. The regulation defines key terms including food contact substances, common use in food, and safety standards requiring reasonable certainty of harmlessness under conditions of intended use, determined through scientific procedures or general recognition of safety.
Frozen Vegetables
21 CFR Part 158 establishes standards for frozen vegetables, specifically defining identity, size specifications, and labeling requirements. Frozen peas must be prepared from Pisum sativum L., blanched, drained, and frozen to −18 °C or lower. Standards address acceptable quality levels, defect criteria, size grading (minimum 80% by weight of declared size), and mandatory label declarations including product name, freezing method, flavoring, and condiments.
Cereal Flours and Related Products
21 CFR Part 137 establishes standardized requirements for cereal flours and related products. The regulation defines wheat flour specifications including granulation standards (≥98% passing 212 µm sieve), ash and protein limits, moisture content (≤15%), and permitted optional ingredients such as dough conditioners (ascorbic acid up to 200 ppm) and bleaching agents (chlorine, benzoyl peroxide, azodicarbonamide, etc.). All ingredients must be labeled per FDA requirements, with specific declarations required for bleached flour and enzyme additions.
Sweeteners and Table Sirups
21 CFR Part 168 establishes standardized specifications for sweeteners and table syrups, including dextrose anhydrous, dextrose monohydrate, and glucose syrup. Requirements cover minimum solids content, reducing sugar content, sulfated ash limits, and sulfur dioxide content, with testing methods referenced from AOAC official methods.
Cacao Products
21 CFR Part 163 establishes standards for cacao products, including specifications for cacao nibs. The regulation prescribes analytical methods for determining shell and fat content, defines cacao nibs as shelled cacao beans with maximum 1.75% shell content, permits optional alkali processing and neutralizing agents within specified limits, and requires labeling statements identifying processing methods used.
Secondary Direct Food Additives Permitted in Food for Human Consumption
21 CFR Part 173 establishes permitted secondary direct food additives for human consumption, including polymer substances and adjuvants. The regulation specifies acrylate-acrylamide resins, modified polyacrylamide resins, and ion-exchange membranes as safe food processing additives with defined usage limits and residual monomer restrictions. Acrylamide-based resins are approved as flocculents in sugar juice clarification and scale control, while ion-exchange membranes are permitted for juice processing and pH adjustment.
Irradiation in the Production, Processing and Handling of Food
21 CFR Part 179 establishes safety standards for using ionizing radiation sources in food production, processing, and inspection. Approved sources include X-ray tubes (≤500 kVp), sealed isotope units (americium-241, cesium-137, cobalt-60, iodine-125, krypton-85, radium-226, strontium-90), californium-252 for moisture measurement, and machine sources up to 10 MeV. Facilities must comply with current good manufacturing practices, apply minimum effective doses not exceeding specified limits (10 grays for standard sources, 2 milligrays for californium-252), use scheduled processes, and ensure packaging compliance.
Macaroni and Noodle Products
21 CFR Part 139 establishes standards of identity and labeling requirements for macaroni and noodle products. It defines macaroni, spaghetti, and vermicelli based on shape and diameter, specifies permitted optional ingredients including egg white, disodium phosphate, seasonings, salt, gum gluten, and glyceryl monostearate with quantitative limits, and requires labeling statements disclosing optional ingredients used in the finished product.
Food Additives Permitted in Food or in Contact with Food on an Interim Basis Pending Additional Study
21 CFR Part 180 establishes the regulatory framework for interim approval of food additives and food-contact substances when new safety or functionality concerns arise but evidence does not conclusively prove harm. Interim regulations permit continued use during study periods, subject to specified limitations, mandatory progress reporting every six months, and compliance with good laboratory practice standards. The FDA may revoke interim approvals if adequate studies are not initiated within 60 days or if interim results indicate health hazards.
Indirect Food Additives: Adhesives and Components of Coatings
21 CFR Part 175 establishes safety standards for indirect food additives used in adhesives and coatings that contact food through packaging. Adhesives may be safely used in food packaging if they contain approved substances, remain separated from food by a functional barrier or meet contact limits, and are properly labeled. Pressure-sensitive adhesives for labels and tapes on poultry, dry foods, and processed fruits/vegetables must be formulated from safe substances or prior-approved components, with specified limits on antioxidants, optical brighteners, and photoinitiators.
Indirect Food Additives: General
21 CFR Part 174 establishes general regulatory provisions for indirect food additives—substances used in food-contact articles such as packaging and processing equipment. It defines good manufacturing practice requirements, including limits on additive migration into food and purity standards for components. The regulation permits use of substances generally recognized as safe, those with prior approval, and those meeting negligible migration thresholds, provided they comply with all applicable Federal Food, Drug, and Cosmetic Act provisions.
Food Standards: General
21 CFR Part 130 establishes general provisions for food standards under the Federal Food, Drug, and Cosmetic Act. It defines key terms, procedures for establishing food standards through formal petition and public hearing processes, and FDA's review framework for Codex Alimentarius standards. All standardized foods must comply with ingredient listing requirements, use only safe and suitable ingredients, and cannot be adulterated or misbranded regardless of compliance with specific food definitions.
Substances Generally Recognized as Safe
21 CFR Part 182 establishes FDA regulations for substances generally recognized as safe (GRAS) for use in food. The regulation defines GRAS status, outlines good manufacturing practice requirements including quantity restrictions and food-grade purity standards, and lists approved food ingredients such as spices, essential oils, natural extractives, and synthetic flavoring substances that may be used in accordance with the established guidelines.
Canned Fruit Juices
21 CFR Part 146 establishes federal standards for canned fruit juices, including definitions of ingredients (corn syrup, dextrose, glucose syrup, invert sugar, refined sugar) and compliance procedures. It specifies sampling and acceptance criteria for quality and container fill, with detailed lot definitions and defective unit classifications. The regulation includes specific identity standards for lemon juice requiring mechanical extraction from mature lemons with minimum soluble solids content.
Frozen Desserts
21 CFR Part 135 establishes federal standards for frozen desserts, particularly ice cream and frozen custard. Ice cream must contain minimum 10% milkfat and 10% nonfat milk solids, weigh at least 4.5 pounds per gallon with 1.6 pounds of total solids, and contain less than 1.4% egg yolk solids (except frozen custard at 1.4% minimum). Products must be made from pasteurized mixes heated to specified temperatures and may include optional dairy ingredients, sweeteners, and safe flavoring ingredients.
Fruit Butters, Jellies, Preserves, and Related Products
21 CFR Part 150 establishes standards of identity for fruit butters, jellies, preserves, and related products. Fruit butters must be smooth, semisolid foods made from specified fruit ingredients with optional additions such as sweeteners, spices, flavorings, salt, acidifying agents, juice, preservatives, antifoaming agents, and pectin. The mixture must contain at least five parts fruit ingredient to two parts sweetener by weight, with a minimum soluble solids content of 43 percent as determined by refractometer analysis.
Processing and Bottling of Bottled Drinking Water
21 CFR Part 129 establishes current good manufacturing practice requirements for processing and bottling of bottled drinking water. The regulation mandates that facilities use approved water sources, maintain sanitary conditions throughout processing, bottling, holding, and shipping, and implement controls ensuring product safety. Key requirements include plant construction standards with separated bottling rooms, proper ventilation, enclosed container washing areas, and use of nontoxic materials for water-contact surfaces.
Canned Vegetables
21 CFR Part 155 establishes standards for canned vegetables, including procedures for determining drained weight, quality compliance, fill of container, and sampling/acceptance criteria. The regulation defines lot compliance based on defect limits, establishes sampling plans and acceptance numbers, and specifies color measurement standards using Munsell color discs for products like tomato concentrates.
Beverages
21 CFR Part 165 establishes standards for beverages, particularly bottled water. It defines key terms such as lot, sample, and analytical unit for quality testing purposes. Bottled water is defined as water sealed in containers with no added ingredients except optional safe antimicrobial agents and fluoride. The regulation specifies nomenclature for different water types including artesian, ground, mineral, and purified water, with specific chemical and source requirements for each category.
Vegetable Juices
21 CFR Part 156 establishes standards for vegetable juices, defining quality and composition metrics including color strength (measured by Munsell color disc comparison), tomato soluble solids content (determined by refractive index), and salt content (sodium chloride). The regulation specifies sampling and acceptance procedures to determine compliance with quality and fill standards for lots of canned vegetable juice products.