PHMSA published a document in the Federal Register on April 21, 2026, issuing an advisory bulletin on preventing excavation damage. This notice corrects references to the Common Ground Alliance (CGA) Best Practices.
آخر تعديل قبل شهر واحد.
PHMSA published a document in the Federal Register on April 21, 2026, issuing an advisory bulletin on preventing excavation damage. This notice corrects references to the Common Ground Alliance (CGA) Best Practices.
المصدر
https://www.federalregister.gov/documents/2026/06/22/2026-12505/pipeline-safety-advisory-bulletin-on-preventing-excavation-damage-during-national-safe-digging-monthالوثيقة الرسمية لدى الجهة التنظيمية. استشهد دائماً بهذا الرابط — لا بصفحة تفاصيل Vantage — في أدلة الامتثال.
The Environmental Protection Agency (EPA) is approving with conditions, no-migration variances for four categories/groups of wastes, containing up to a combined 250 temporary disposal units ("put piles") at any one time, from the Resource Conservation and Recovery Act (RCRA) Land Disposal Restrictions (LDR) standards at Clean Harbors' Grassy Mountain (Clean Harbors) commercial treatment, storage and disposal facility (TSDF) in Tooele County, Utah. These variances will allow Clean Harbors to temporarily store treated hazardous wastes that are awaiting LDR compliance verification in put piles within its Subtitle C (hazardous waste) landfill. The petitioner demonstrated, to a reasonable degree of certainty, that there will be no migration of hazardous constituents from the put piles for as long as the wastes remain hazardous. Additionally, once LDR compliance is verified, the put piles will be disposed within the onsite RCRA hazardous waste landfill cell and will be subject to the conditions set out in the Compliance Monitoring Plan section of this document.
FAA regulation 14 CFR Part 420 establishes licensing requirements for persons operating commercial launch sites in the United States. The rule prescribes application procedures, safety demonstrations, approval bases, license terms, and post-licensing compliance obligations. Applicants must meet equivalent safety standards, with exemptions for amateur rocket operations. The regulation defines key technical terms including debris dispersion, casualty areas, and coordinate systems used in launch safety analysis.
21 CFR Part 117 establishes current good manufacturing practice (CGMP), hazard analysis, and risk-based preventive controls requirements for human food manufacturing, processing, packing, and holding facilities in the US. The regulation defines applicability, key food safety terms (including critical control points, allergen cross-contact, environmental pathogens), and compliance obligations under the Federal Food, Drug, and Cosmetic Act to prevent adulteration and contamination.
21 CFR Part 110 establishes current good manufacturing practice (CGMP) standards for manufacturing, packing, and holding human food. The regulation defines key terms including acid foods, critical control points, food-contact surfaces, microorganisms, pests, sanitization, and quality control operations. It sets mandatory requirements (indicated by "shall") and advisory procedures to prevent food adulteration and ensure food safety through proper manufacturing and sanitation practices.
21 CFR Part 113 establishes regulatory requirements for thermally processed low-acid foods packaged in hermetically sealed containers. The regulation defines key concepts including commercial sterility, aseptic processing, critical factors, and equipment specifications to ensure microorganisms capable of reproducing under normal storage conditions are eliminated, protecting public health and maintaining product safety in shelf-stable food manufacturing.