مجموعة اللوائح العالمية
تصفح 11,703 لائحة من 34 جهة تنظيمية
1,774 تم تحديثها في آخر 30 يومًا. مجموعة عامة — لا حاجة إلى تسجيل للقراءة.
عرض 601–623 من أصل 623 لائحة
Thermal Insulation in Buildings Regulation
Thermal Insulation in Buildings Regulation” which was published on 08.05.2000 is considered as the first main regulation dealing with building energy performance issue in Turkey. This regulation required buildings to be insulated according to rules explained in “TS 825: Thermal…
2013 IECC - Residential Building Code (Alaska)
Fenestration (IECC Sections R303.1.3, R402.3, R402.5) Fenestration (including all windows and doors) and skylight U-factors are maximum acceptable levels. The glazed fenestration SHGC mximums apply to all windows, skylights and glazed doors. Upto 15 square feet of glazed…
IECC 2009 - Residential Code (Kentucky)
Governance Development Authority: International Code Commission and Kentucky Board of Housing, Buildings and Construction Implementation Authority: Local authorities Verification Authority: Code official Prescriptive Compliance path Occupiable space, excluding crawl spaces…
IECC 2011 - State Building Code (Louisiana)
Governance Development Authority: International Code Commission Implementation Authority: Municipal or county governments Verification Authority: Code officials Prescriptive Compliance path The horizontal projection of that portion of interior space which is contained within…
2018 North Carolina Residential Building Code (based on the 2015 IECC with amendments)
Compliance Projects shall comply with one of the following: 1. Sections R401 through R404. 2. Section R405 and the provisions of Sections R401 through R404 labelled "Mandatory." 3. An energy rating index (ERI) approach in Section R406. Building Thermal Envelope The building…
Wisconsin Uniform Residential Code (based on the 2009 IECC)
Air leakage: Window and door assemblies: (a) General. Except as specified in par. (b), windows, skylights and sliding glass doors shall have an air infiltration rate of no more than 0.3 cfm per square foot, and swinging doors no more than 0.5 cfm per square foot, when tested…
2011 Wisconsin Commercial Building Code (based on the 2009 IECC)
Policy Requirement Level Model Code Governance Development Authority: International Code Council Implementation Authority: Local authorities Prescriptive Compliance path Occupiable space, excluding crawl spaces and garages Energy Requirements: Insulation U-Values (Btu/h.ft2)…
2009 IECC State Residential building Code (West Virginia)
Notable requirements in the 2009 IECC: · Building envelope must be caulked and sealed. · Slab-on-grade insulation is R-10 to a depth of 2 feet. · Supply ducts in attics must be insulated to R-8. Return ducts in attics and all ducts in crawlspaces, unheated basements, garages, or…
ASHRAE 90.1-2007 Commercial Code (West Virginia)
Standard 90.1-2007 sets requirements for the cost-effective use of energy in commercial buildings. Certain buildings that have very low energy use, such as buildings with no heating or cooling, are exempt. Standard 90.1-2007 applies to new buildings and to alterations and…
2012 IECC Building Code (Washington, DC)
The DC Green Code covers: ü All commercial projects (10,000 SF and larger) ü Multi-family residential 4 stories and larger (and 10,000 SF and larger) Service Water Heating (404) ü Coverage üRestrooms, showers, laundries, kitchens, pools and spas, defrosting of sidewalks and…
2009 IECC Building Code (U.S. Virgin Islands)
Policy Requirement Level Model Code Governance Development Authority: International Code Council Implementation Authority: Local authorities Prescriptive Compliance path Occupiable space, excluding crawl spaces and garages Energy Requirements: Insulation U-Values (Btu/h.ft2)…
2009 IECC South Dakota (Residential)
The International Energy Conservation Code (IECC) is a model code that regulates minimum energy conservation requirements for new buildings. The IECC addresses energy conservation requirements for all aspects of energy uses in both commercial and residential construction,…
IECC 2009 - State Building Code (South Carolina)
The International Energy Conservation Code (IECC) is a model code that regulates minimum energy conservation requirements for new buildings. The IECC addresses energy conservation requirements for all aspects of energy uses in both commercial and residential construction,…
IECC 2009 - Uniform Energy Code (Michigan)
Governance Development Authority: International Code Commission Implementation Authority: Local authorities Verification Authority: Code official Prescriptive Compliance path Occupiable space, excluding crawl spaces and garages Energy Requirements: Insulation U-Values…
IECC 2014 - State Building Code (Delaware)
Governance Development Authority: International Code Commission Implementation Authority: Local authorities Prescriptive Compliance path Occupiable space, excluding crawl spaces and garages Energy Requirements: Insulation U-Values (Btu/h.ft2) Floor Roof Walls Windows Climate…
2009 IECC with New Hampshire amendments
Buuilding envelop requirements applies to new residential buildings, as defned in the IECC, with wood framing and/or mass walls. For steel framed buildings, the same window requirements apply; however, refer to IECC section 402.2.5 for specific ceiling, wall and floor insulation…
2012 IECC with Nevada amendments
The new energy codes become effective. The residential code is based on the 2012 IECC with Nevada amendments. The commercial code is based on the 2012 IECC with Nevada amendments with ASHRAE Standard 90.1-2010. The code applies to new residential buildings, as defined in the…
2012 IECC with Montana amendments
Due to state amendments, the residential code is not quite equivalent to the 2012. Still, major improvement to the new energy code include: More efficient windows (U-0.32); More efficient crawlspace walls; Mandatory whole-house blower-door test requirement, beginning 2016;…
National Energy Policy
The National energy policy for Malta was launched in December 2012 after the publication of a first draft in 2009 and the finalisation of a strategic environmental impact assessment in September 2012. It lists decisions and actions that have already been implemented as well as…
Act on the rational use of energy (Energy Efficiency Act)
Act on the rational use of energy (known as the “Energy Efficiency Act”) was enacted in 1979 (enforced in October 1979). The Act is the foundation of Japans’ energy efficiency and conservation policy. There has been a series of major revisions in 1993, 1998, 2002, 2005, 2008,…
NOM-024-ENER-2012: Thermal and optical characteristics of glass and glazing systems for buildings. Labelling and test methods
This standard establishes the obligation to certify the optical and thermal characteristics of glass and glass systems, homogeneous transparent and translucent for use in buildings. The properties under this standard are: visible transmittance (VT); solar heat gain coefficient…
Windows Energy Rating Scheme (WERS)
The Window Energy Rating Scheme enables windows to be rated and labelled for their annual energy impact on a whole house, in any climate of Australia. To participate in WERS, window makers must obtain energy ratings for their products from a rating organisation that is…
Market transformation road map for energy efficient equipment in the building sector
In support of Canada's Building Strategy, Federal, Provincial and Territorial Governments outlined a series of aspirational goals for energy performance of key equipment technologies and market transformation needs in a report released at the Energy and Mines Minister’s…